Dust Monitor Overview
The DCEM2100 dust monitor provides a continuous measurement of opacity or dust concentration in flue gases by continuously measuring the transmissivity of visible light across a process duct or stack.
Its dual-pass optical arrangement is based on twin transmissometers measuring in opposing directions through the same section of the gas stream, providing not only an accurate average of the dust loading, but also providing a unique dynamic assessment of any misalignment errors due to stack movement.
Features & Benefits
- % opacity or dust density in mg/Nm3.
- TUV & MCERT Approved.
- Dual-pass, open-path transmissometer.
- Integral auto zero and span check.
- Full contamination check on all active optical surfaces.
- Dynamic misalignment check.
- Integral high efficiency air curtains for maximum uninterrupted service.
Certified Product
The DCEM2100 has both TUV and MCERT certification which signifies the accuracy and reliability of its measuring capabilities.
Product Specification
| Measuring units | % opacity, mg/m3, mg/Nm3 |
| Accuracy | ±0.2% opacity |
| Ambient Temperature | -20°C to +70°C |
| Power supply | 48V DC supplied from Power Supply Unit (PSU) |
| Construction | Corrosion resistant epoxy coated aluminium housing sealed to IP66 |
| Analogue outputs | 2 x 4-20mA current outputs, isolated, 500Ω load max. fully configurable from keypad |
| Logic Outputs | 2 x volt-free SPCO contacts, 50V,1A max., configurable as alarm contacts 1 x volt-free SPCO contact, 50V,1A max. for data valid |
| Serial Data | RS232/RS485 MODBUS protocol (Optional) |
Certification
Brochure Download
Looking for a manual?
Please contact us below and we will be happy to help you.
Ask a question
For further information on any of our products, please complete our enquiry form and a member of staff will respond as soon as possible.
You can also call: +44(0)1629 814351
