CEMS Extractive Gas Monitor Case Study

Eagle Valley Clean Energy

12MW biomassfired (waste wood) electricity generating facility

Главная / О нас / Тематические исследования / GCEM40E Extractive Gas Analyser Case Study

The Challenge

Eagle Valley Clean Energy, LLC owns and operates a 12MW biomass power plant, generating electricity from combustion of waste wood.

The customer was using a cold dry extractive gas analyser for NOx compliance monitoring which was reported to be old and unreliable due to lack of maintenance which is a heavy requirement of this measurement technique. The customer was
looking to replace this system but had reservations on investing in another extractive gas analyser.

ESC / Monitoring Solutions offered the CODEL In-Situ GCEM40 Series but due to the installation being immediately after the the ESP, this caused vibration on the chimney stack resulting in a measurement which wasn’t ideal.

Extractive gas stack emission monitoring analyser

The Solution

CODEL offered a more suitable solution by means of upgrading the In-Situ GCEM40 to the GCEM40E, CODEL’s Hot Wet Extractive version in order to eliminate any vibration related issues.

The CODEL GCEM40E analyser was installed in August 2022 with a requirement to be in operation before the upcoming EPA test. In January 2023 we assisted plant operators to check the 40E analyser prior to the EPA source test.

During the test, CODEL 40E NOx was 5ppm lower on average compared to the reference method and the 40E NOx CEMS passed the test. Auditing company have not advised any actions on correcting the small discrepancy as it is within acceptable tolerance.

The Result

CODEL offered a more suitable solution by means of upgrading the In-Situ GCEM40 to the GCEM40E, CODEL’s Hot Wet Extractive version in order to eliminate any vibration related issues.

The CODEL GCEM40E analyser was installed in August 2022 with a requirement to be in operation before the upcoming EPA test. In January 2023 we assisted plant operators to check the 40E analyser prior to the EPA source test.

The CODEL 40E analyser is running flawlessly offering low maintenance, high reliability and very small span gas consumption in comparison to fully compliant CEMS.

Custom Feedback

The CODEL GCEM 40E NOx analyzer zero spans every 24 hours per manufacturer recommendation, when CODEL conducted a High Span which hadn’t been conducted in months the unit was within 0.5ppm, very impressive. The unit has been reliable and consistent, requiring little maintenance and is accompanied with good customer support.

GCEM40E CEMS Extractive Gas Monitor

The GCEM40E hot extractive multi-channel gas analyser is CODEL’s industry-proven continuous emissions monitor for difficult applications. Designed exclusively for use on a wide range of applications where the flue gas temperature is abnormally high, low or saturated.

Особенности и преимущества

Download Case Study

Download this case study as a PDF document.

Для получения дополнительной информации о любом из наших продуктов, пожалуйста, заполните форму запроса, и сотрудник ответит вам в кратчайшие сроки.

Вы также можете позвонить по телефону: +44(0)1629 814351








    Русский